At present, the traditional epoxy floor coating construction materials in hangzhou market can be divided into solvent type and non-solvent type, both of which contain certain volatile organic compounds (VOC), which will be released into the air in the production, construction and other stages to pollute the environment and harm health. Waterborne epoxy floor paint has been gradually recognized by the market in recent years. At present, the pressure of environmental protection is affecting the epoxy floor paint all over the world.
Seka floor engineering adhere to independent research and development, innovation and development, the production of water-based epoxy coating with water as the solvent, good adhesion to the wet substrate, environmental protection, easy to operate, wide range of application. Seka waterborne epoxy floor paint solves the problem that waterborne products are not wear-resistant and dirty.
1, with water as the dispersing medium, environmental protection and health, can be used in the relatively closed and construction needs to be carried out at the same time.
2, non-toxic, is a food grade coating, only contains silicon, oxygen, aluminum and other inorganic components and does not contain heavy metals.
3, with high temperature resistance, smokeless, non-combustible characteristics. Has the very strong fire protection function to the building.
4、對地基含水率要求低。 Low requirement on foundation moisture content.
5、表面張力低、表面污垢易清理、單向可透水汽。 Low surface tension, easy cleaning of surface dirt, one-way water vapor permeability.
6、可形成4H以上的表面硬度，具有很強的耐劃傷性。can form more than 4H of surface hardness, with a strong scratch resistance.
7、該產品可與基礎水泥發生反應，形成整體的地坪體系，不起泡、不脫層，使地坪系統使用更持久。The product can react with the base cement to form an overall floor system, without foaming or delamination, making the floor system more durable.
8、耐侯性極佳，可用在室外。Excellent weather resistance, suitable for outdoor use.
Green environmental protection, water-based coating, strong adhesion, uniform texture, good weather resistance, higher hardness, good pollution resistance, one-way ventilation
(1)底涂：將混凝土基材處理完畢并清理干凈后就可進行底涂(輥涂或刷涂)，輥涂或刷涂應均勻，厚薄一致，該底涂具有一定的透水氣功能，能增強基材強度并增加涂層對基材的附著力。base coating: after the concrete substrate is processed and cleaned, the base coating (roller coating or brush coating) can be carried out. The roller coating or brush coating should be uniform in thickness, and the base coating has a certain amount of permeable aerodynamic energy, which can enhance the strength of the substrate and increase the adhesion of the coating to the substrate.
(2)中涂：在已配好的水性環氧涂料BA-30W 中加入石英砂和石英粉配成水性環氧砂漿，用刮刀將其均勻涂布，用于增加厚度及涂層抗壓強度;medium coating: add quartz sand and quartz powder to the prepared water-borne epoxy coating ba-30w to form water-borne epoxy mortar, which is uniformly coated with a scraper to increase the thickness and compressive strength of the coating;
(3)膩子：中涂后用水性環氧涂料BA-30W 與石英粉配成的膩子依實際需要施工，要求達到平整無孔洞，無批刀印為準; putty: after medium application, putty made of water-based epoxy coating ba-30w and quartz powder shall be constructed according to actual needs, and it shall be required to level off without holes or batch knife printing;
(4)面涂：用輥筒將水性環氧地坪涂料BA-130W 面涂輥二道，完工后要求整體地面光澤柔和、潔凈、顏色均一、無空鼓;surface coating: two rolls of water-based epoxy floor coating ba-130w surface are applied with a roller. After completion, the whole ground shall have soft luster, clean, uniform color and no empty drum;
(5)養護：面層實干需要24小時，在這期間應進行封閉，以免影響表面潔凈光滑的效果。完工保養7天后方可正式投入使用(以25℃為準，低溫時開放時間需適度延長)。maintenance: the surface layer needs to be dried for 24 hours, during which time it should be closed to avoid affecting the effect of clean and smooth surface. Completion of maintenance after 7 days before put into use, will be subject to 25 ℃, low temperature should be moderately open).